You are here:
Series 63
Solenoid
Specifications
| Connections | NPT and IP65 DIN connections offered with both single and dual coils |
|---|---|
| Duty Cycle | Continuous |
| Operating Pressure | High Flow: Min. 22 psi (1.5 bar) Max. 130 psi (9 bar) |
| Ports | 1/4" NPT |
| Supply Media | Clean dry air |
| Mounting | Direct NAMUR mount. VDI/VDE 3845 |
| Temperature Range | AC: -13°F (-25°C) to +140°F (+60°C) |
| Enclosure Ratings | Weatherproof models: NEMA 4, 4X |
| Certifications | CSA, CE, UL (some models only) |
Features & Benefits
Pilot-Operated Spool Control
These Bray Series 63 solenoid valve units can be used with either spring return or double acting actuators where on/off electrical operation is required. Units have 1/2” NPT conduit connections and IP65 DIN units have cable gland PG9 connectors, also available with 1/2” NPT conduit adapters. The coils are UL recognized and CSA certified. All Series 63 solenoids carry the CE mark.
Features
- Compact
- Modular
- Pilot Operated
- Spool Control Valve
- Convertible From 3-way (3/2) to 4-way (5/2)
- Spring Return or Double Acting
Options
- Stainless Steel housings
- Low-powered units
- Intrinsically safe units
- BUS solenoids are available for DeviceNet and Profibus-PA protocols
- Available AS-i interface solenoids with IP65 DIN/PG9 cable gland connectors
- All direct mount to Bray pneumatic actuators
- Speed controls that allow independent control of speed in both directions