PRODUCT
Product reliability and performance are directly related to quality and a major concern of any customer who must have the assurance they are receiving products as designed, with a material and quality level that meets or exceeds their requirements.
Series 22/23 Lined Butterfly Valve
SPECIFICATIONS

 

SIZE RANGE: 2" - 24" (50mm - 600mm)
BODY STYLE: Wafer, Lug
TEMPERATURE RANGE: -0°F to 392°F (-18°C to 200°C)
PRESSURE RATINGS: Bidirectional Bubble-tight Shutoff: to 150 psi (10.3 Bar)
Body (CWP): 150 psi (10.3 Bar)
BODY MATERIALS: Ductile Iron, Carbon Steel, Stainless Steel
DISC/STEM MATERIALS: Stainless Steel, PTFE/SS, PFA/SS, UHMWPE/SS, UHMWPE/DI, Hastelloy®*, Titanium
SEAT MATERIALS: PTFE, Conductive PTFE, UHMWPE
APPLICATIONS: Highly Corrosive, Toxic Media

 

 

DETAIL

LINED BUTTERFLY VALVE

Extensive field research and engineering have developed this state-of-the-art design which provides excellent shutoff protection (bubble-tight shutoff) and high Cv values. The Series 22/23 resilient seated butterfly valve is crafted in a variety of materials such as PTFE, PFA, Stainless Steel, UHMWPE and special alloys to fit a wide range of customer requirements. As with all Bray's products, precision manufacturing and exceptional quality remain the keys to a proven record of long service life.

SEAL CAPSULE

Seal Capsule

(Secondary Seal) This seal capsule fully isolates the valve body and stem from the line media. The Seal Capsule is made of a virgin PTFE enclosing the internal energizer. The capsule fits into grooves in the upper and lower disc hubs. When compressed between the disc and seat during assembly, the capsule becomes energized, exerting both upward and downward pressure on disc and seat surfaces.

BODY SEALS

Body Seals

(Bidirectional): Reinforced PTFE gaskets are placed between the body halves. These seals eliminate contamination from external environmental conditions and potential leak path from the line media.

ACCESSORIES

  • Tapped Port can be provided in the body neck below the stem seal to connect leak detectors or instrumentation.
  • Grounding Cable is offered to protect against static charge build-up. The cable mounts to the valve body.

Series 22/23 Callouts

[A] TOP STEM BUSHING: A top stem bushing, retained by a stainless steel ring, is provided to absorb actuator side thrusts and is acetal as standard or PTFE as an option.

[B] UPPER STEM SEAL: The upper stem seal serves to keep any environmental contaminants from entering the stem bore.

[C] BODY: Bodies are two piece wafer or lug style and are epoxy coated. All bodies meet full ASME Class 150 and DIN 3840 pressure ratings for hydrostatic requirements.

[D] BEARINGS: PTFE impregnated steel bearings provided for precision alignment of the upper and lower stem.

[E] PRIMARY SEAL: The primary seal is achieved by an interference fit between the extra wide disc hubs and contoured seat.

[F] SEAT DESIGN: The seat design reduces seating/unseating torque and, at the same time, reduces wear on the contacting parts. Curvatures machined into the inner seat area minimize contact forces between the disc and seat as the disc approaches, or opens from, the closed position. This unique seat geometry permits lower torques and reduces seat wear.

[G] SEAT ENERGIZER: A resilient seat energizer extends completely around the seat, including the disc hub. This provides uniform force sufficient for bubble-tight shut off.

[H] NECK: An extended neck design in all valve sizes allows for 2" of piping insulation and provides easy access for mounting actuators..

[I] FLANGE LOCATING HOLES: Locating holes in the wafer version provide quick and precise alignment during valve installation eliminating disc interference with adjacent pipe I.D..

[J] BLOWOUT PROOF STEM: A shoulder is machined into the upper stem. The stem and the disc are pressed together during assembly to become one part, thus the design is a positive stem-to-disc drive connection.

[K] DISC: The lined disc has 1/8" (3 mm) minimum thickness of pure, virgin PTFE or PFA encapsulated over Stainless Steel.

Document Type Download
Sales Brochure - Resilient Seated Butterfly Valves PDF
Technical Manual - Resilient Seated Butterfly Valves PDF
Operations & Maintenance Manual - Resilient Seated Butterfly Valves PDF
Safety Manual - Resilient Seated Butterfly Valves PDF
Typical Flange Bolting with Washers PDF
Typical Flange Bolting without Washers PDF
Series 20/21 Recommended Specifications - Detailed PDF
Series 20/21 Recommended Specifications - Summary PDF
Series 20/21 Sales Reference Drawings PDF
Resilient Seated Sales Reference Drawings PDF

 

Copyright © ITEM ENGINEERING CO.,LTD. All rights reserved.